Hawking Technologies HD45B Uživatelský manuál Strana 42

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 97
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 41
41
2.4GHz Band
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only
wireless clients using the wireless band you select (802.11b,
802.11 Draft-N, or 802.11g) will be able to connect to this
access point.
If you select 2.4GHz (B+G), then only wireless clients using
802.11b and 802.11g band will be able to connect to this
access point.
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N
clients to connect to this access point, select 2.4GHz
(B+G+N).
5GHz Band
5GHz (A): this mode allows 802.11a wireless network client
to connect this router (maximum transfer rate 54Mbps for
802.11a clients).
5GHz (N): this mode allows 802.11n wireless network client
to connect this router (maximum transfer rate 450Mbps for
802.11n clients).
5GHz (A+N): this mode allows 802.11a and 802.11n
wireless network client to connect this router (maximum
transfer rate 54Mbps for 802.11a clients, and maximum
450Mbps for 802.11n clients).
Channel Number (3): Please select a channel number you wish to use. Please
note that this should be the same channel as the other bridge
you wish to connect to.
Mac Address (4): Please input the MAC addresses of the other bridges you
wish to make a connection with.
Set Security (5): Click this button to select an encryption mode for this
wireless link, a new popup window will appear. Note: the
security must be the same on the other bridges.
Zobrazit stránku 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 96 97

Komentáře k této Příručce

Žádné komentáře